Tech-Protect Supreme Protection Tempered Glass for Xiaomi Redmi Note 14 PRO / 14 PRO+ 5G / Poco X7 5G - Clear

Tech-Protect UV Glass is a premium tempered glass that will provide exceptional protection for your device's screen. Thanks to UV application technology, the glass adheres perfectly to the surface, eliminating the formation of air bubbles and providing full transparency and touch sensitivity. The 9H hardness effectively protects the screen from scratches, bumps and other mechanical damage, and the special UV-curing adhesive guarantees a perfect fit and stability, even on curved screens. The glass provides full coverage of the screen, from edge to edge, without affecting image quality or color reproduction, and its smooth surface allows you to maintain the full responsiveness of the touchscreen. Tech-Tech-Protect Glass UV is an ideal solution for those looking for reliable screen protection while maintaining the aesthetics and functionality of the device. * We do not recommend using 3D glass without any case. ** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of prying it open. The functionality of the fingerprint reader in the screen may be slightly impaired if a foil or glass coating is installed. The fingerprint reader is not fully refined for additional coatings. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Tape the speaker with tape from the set. 4) Connect the UV lamp with a Type-C cable to a power source. 5) Pour the liquid right into the middle of the device. 6) Install the glass as evenly as you can, you can also correct this step before hardening the surface when the liquid is on the screen with the glass. 7) If a bubble of air has appeared, use an ATM card and gently push it out of the glass, this is done before curing. 8) Using a UV lamp, cure the glass along the center in five places for 15 seconds and then around the edge for 10 seconds. 9) Clean the phone of the hardened glue residue. 10) If your device has an in-screen fingerprint reader, be sure to remove and re-add the fingerprints after installing the glass on the screen. 11) Enjoy a job well done!