Tech-Protect Hofi Glass Pro+ Tempered Glass for Samsung Galaxy Tab S9 FE 10.9" X510 / X516B - with Black Frame

Crystal clear tempered glass that perfectly renders the displayed colors and does not affect touch sensitivity. It is made of light and milled glass with a thickness of 0.26 mm. It has a surface hardness (resistance level) of 9H, so it is extremely scratch-resistant even when in contact with sharp objects (knife, keys). In addition, it is covered with an oleophobic coating, which minimizes the number of fingerprints or other contaminants. Hofi Pro+ perfectly protects the precious screen during extreme falls. Installation is extremely easy and accessible to every user. How to check if a particu lar accessory fits your Samsung Galaxy Tab? It's simple, check the model number of your device that starts with the letter T or X. Our accessories are perfectly matched and fully compatible with: X510 / X516B. * The glass/film is cut only to the flat part of the display with an emphasized structure, according to and on the basis of the die prepared by the manufacturer of a given model of the device. Only such cutting of the film/glass will ensure complete compatibility with our protective accessories. ** Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight halo of air may form around the screen! This is a natural situation and depends on the screen itself. Product photos are illustrative, depending on the dimensions of the glass, it may be packed in a different packaging. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation. 2) Clean and degrease the surface of the screen thoroughly, and then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets of tape by sticking them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.